Caution : You must read this before you proceed Bench Label Description QTY D Seat 1 E Long Leg 2 F Short Leg 2 Description QTY ① Bolt (M6*15MM) 11 ② Bolt (M6*55MM) 9 Label Picture Picture Page 1 OF 5
③ Washer 9 ④ Allen Key 1 Before Beginning Assembly: Overview Seat(D) Short Leg(F) Long Leg(E) FRONT FACING This Bench has multiple parts and may require up to 30 minutes to assemble. To give you an overview of the Bench parts, the above picture is to help you put the various parts into perspective. Please read through the instructions below to familiarise yourself with the parts and steps before assembly.
Step 1 E D D E setp1.1 D F setp1.2 E ③ setp1.3 F ① ① ④ ④ ④ ② Open the carton and place all the parts onto a clean, non-marring surface. Place the Seat(D) facedown. Step1.1: Attach Seat(D) to Long Leg(E) using Bolts(①) with Allen Key(④) as shown above. Step1.2: Attach Seat(D) to Short Leg(F) using Bolts(①)with Allen Key(④) as shown above. Step1.3: Attach Long Leg(E) to Short Leg(F) using Bolts(②)and Washer(③) with Allen Key(④) as shown above. Do not fully tighten the Bolts.
Step 3 F F F D E E E D D setp3.1 ① ④ setp3. ② ③ ③ setp3.3 ④ ② ④ Step3.1:Attach Seat(D) to Short Leg(F) using Bolts(①) with Allen Key(④) as shown above. Step3.2:Attach Long Leg(E) to Short Leg(F) using Bolts(②)and Washer(③) with Allen Key(④) as shown above. Step3.3:Attach Long Leg(E) to Short Leg(F) using Bolts(②)and Washer(③) with Allen Key(④) as shown above. Do not fully tighten the Bolts. Step 4 Stand the Bench up. Place the Bench on a LEVEL SURFACE.
Page 5 OF 5
Caution : You must read this before you proceed Table Label Description QTY A Wooden Countertops 1 B Long Leg 2 C Short Leg 2 Description QTY ① Bolt (M6*15MM) 13 ② Bolt (M6*55MM) 9 ③ Washer 9 ④ Allen Key 1 Label Picture Picture Page 1 OF 5
Before Beginning Assembly: Overview Wooden Countertops（A） Short Leg（C） Long Leg（B） FRONT FACING This Table has multiple parts and may require up to 30 minutes to assemble. To give you an overview of theTable parts, the above picture is to help you put the various parts into perspective. Please read through the instructions below to familiarise yourself with the parts and steps before assembly.
Step 1 B B A B A setp1.2 setp1.1 A C setp1.3 C ③ ① ① ④ ④ ④ ② Open the carton and place all the parts onto a clean, non-marring surface. Place the Wooden Countertops(A) facedown. Step1.1:Attach Wooden Countertops(A) to Long Leg(B) using Bolts(①) with Allen Key(④) as shown above. Step1.2:Attach Wooden Countertops(A) to Short Leg(C) using Bolts(①)with Allen Key(④) as shown above. Step1.3:Attach Long Leg(B) to Short Leg(C) using Bolts(②)and washer(③) with Allen Key(④) as shown above.
B C Step 3 C B A setp3.1 B A B ③ setp3.2 A setp3.3 C ③ ① ④ ② ④ ② ④ Step3.1:Attach Wooden Countertops(A) to Short Leg(c) using Bolts(①) with Allen Key(④) as shown above. Step3.2:Attach Long Leg(B) to Short Leg(c) using Bolts(②)and Washer(③) with Allen Key(④) as shown above. Step3.3:Attach Long Leg(B) to Short Leg(c) using Bolts(②)and Washer(③) with Allen Key(④) as shown above. Do not fully tighten the Bolts. Step 4 Stand theTable up. Place the Table on a LEVEL SURFACE.
Page 5 OF 5
