Owner Manual

5
Mounting into three wall studs
Mounting into two wall studs and drywall anchors
C
C
C
AVOID INJURY and DAMAGE! Three screws should be screwed directly into wall
studs. If only two studs are available, two screws must be screwed directly into the
wall studs, and additional screws must also be screwed into the drywall anchors.
Drywall
Studs
STEP 2. A. Locate the wall studs using an electronic stud-finder. Mark the hole locations with a
pencil. The holes should be 8” (20.3 cm) apart, and level. The minimum height from the surface
below must be 19.7” (50 cm). B. Three screws should be screwed directly into wall studs. Then, no
drywall anchors are needed. C. If only two studs are available, two screws MUST be screwed
directly into studs, and the other screws must be screwed into the drywall anchors.
ALWAYS unplug this fireplace heater before assembly or cleaning, or before
relocating. Failure to do so could result in electric shock, fire, or personal injury.
NOTICE
The wall mount fasteners included with this fireplace are for use ONLY with a
wood-framed wall covered in drywall (sheet rock). For concrete walls, cinder
blocks, or other wall types, consult a professional for the best attachment methods.