Owner Manual

7
NOTE: The fireplace comes with the faux log bed in place, and can be used as is. To switch
to decorative glass or stones, follow these steps. Have a capable adult help you.
ALWAYS keep the decorative crystals and pebbles OUT OF REACH OF CHILDREN!
Leave no pieces where children can find them. Failure to do so could cause a choking
hazard.
This next step involves GLASS! ALWAYS use extreme caution when handling glass.
Failure to do so could result in personal injury or property damage.
STEP 5. A. With the help of a capable adult, lift the fireplace (A) and align the hooks on the back of
the fireplace with the slots on the wall bracket. Carefully set the hooks into the slots.
B. Secure the fireplace to the wall bracket with two M5x10 metal screws (D), one on each side.
Thread the screws through the fireplace and into the wall bracket side tabs. Tighten both screws
with a Phillips screwdriver. The unit may now be plugged in.