Owner Manual

ASSEMBLY INSTRUCTIONS
5
3. Connect the driver connector (D) coming from
the mounting bracket (B) to the driver connector
coming from the canopy (A).
Short Machine
Screw
Long Machine
Screw
x 2
x 2
BB
CC
Hardware Used
2. Insert two long machine screws (CC) 3/4 of the
way into the mounting bracket (B) for securing
the pan (A) in later steps. The head of long
machine screws (CC) should be on the opposite
side of the outlet box.
Connect the mounting bracket (B) to outlet box
with short machine screws (BB).
Outlet Box
2
BB
B
CC
3
D
B
A
4. Pass pan (A) over the long machine screws
(CC) protruding from the mounting bracket (B).
Turn pan (A) clockwise to lock the long machine
screws (CC) in the keyhole and then tighten to
secure.
4
A
B
CC