Step 1. Lay seat panel (part A) upside down on a soft flat surface, such as carpet, as shown below. Attach front legs (part B) and back legs (part C) to seat panel (part A) using bolts (part #1), flat washers (part #2) and allen wrench (part #3). NOTE: Please fully tighten all bolts at this time. #3 C #1 C #2 B A B #1 x16 #2 x16 #3 x1 Step 2. Carefully turn unit upright. Add seat cushion (part D) and back cushion (part E) as shown below. Repeat step 1 to assemble remaining chair.
