BOOK CASE ASSEMBLY INSTRUCTION PAGE 1 OF 7
ASSEMBLY INSTRUCTION (A) TOP WOOD (B) LEFT SHELF WOOD 1pc (F) LARGE SIDE WOOD 3pcs 1pc (B1) BOTTOM LEFT SHELF WOOD 1pc (G) (C) RIGHT SHELF WOOD (D) CENTER SHELF WOOD (E) BOTTOM WOOD 1pc 1pc 1pc 1pc SMALL SIDE WOOD (H1) MEDIUM SHELF WOOD 5pcs (H) SHELF WOOD 5pcs (I) CROSS BAR 3pcs PAGE 2 OF 7
ASSEMBLY INSTRUCTION THREADED ROD WOOD DOWEL LARGE ALLEN BOLT STICKER SMALL ALLEN BOLT GLUE CAP FLOOR PROTECTOR ALLEN KEY PAGE 3 OF 7
ASSEMBLY INSTRUCTION Product can be assemble facing down or up STEP1: 1.Insert Wood Dowel(2)into Medium Shelf Wood(H1)and Shelf Wood(H) and Large Side Wood(F). Then insert Caps(7)into Cross Bar(I). 2.Connect Top Wood(A)with Medium Shelf Wood(H1)and Shelf Wood(H)and Large Side Wood(F)using Small Allen Bolt(5)and use Threaded Rod(1)to screw together Top Wood(A)and Cross Bar(I) 3.
ASSEMBLY INSTRUCTION STEP2: 1.Insert Wood Dowel(2)into Medium Shelf Wood(H1)Shelf Wood(H) and Large Side Wood(F) 2.
ASSEMBLY INSTRUCTION STEP3: 1.Insert Wood Dowel(2)into Medium Shelf Wood(H1)and Shelf Wood(H) and Large Side Wood(F)and Small Side Wood(G)then Cross Bar(I) insert into Cap(7) 2.Insert Medium Shelf Wood(H1)and Shelf WOOD(H)and Large Side Wood(F) onto Center Shelf Wood(D)then tighten with Small Allen Bolt(5) Use Threaded Rod(1)to tighten Cross Bar(I)and Center Shelf Wood(D) 3.
ASSEMBLY INSTRUCTION STEP4. Nail Floor Protector(8)onto Bottom Wood(E) Set the finished product standing up.
