Screw cam bolts and insert wood dowels into panel (3&5&4) Attach panel(3&4&5&6) with cam and locked as below Screw cam bolts and insert wood dowels into panel (1&2) Attach panel(1&2) to carcass with cam and locked as below
Attach panel(7&9&8) with double hole iron plate(D) with screw(C) as below Screw cam bolts and insert wood dowels into panel (7&9&8) and attach them to carcass with cam and locked as below
Attach LED band to panel(1) and attach bottom Legs(F) with screw(G) as below Attach glass clamps(E) to panel(3&4&5) with screw(C) and put glass into the carcass as below
Connected pin of LED and power adapter to the RGB control box as below Remove the battery protection pad from remote controller. Align remote controller to the RGB control box to adjust the color mode.
