Assembly Instructions ASSEMBLY RATING The Assembly Rating is a 5-point system that shows the degree of effort needed in assembling a specific product (with 1 being easy and 5 being difficult). For some products, two persons are recommended.
Before you begin, please read Page 2 oy of “Assembly and Care Advice”. ~ And remember, do not tighten until each step is completed or instructed. Parts List 1 #1x1pecx2 Backrest w/Legs #2 x1pcx2 Seat Hardware List #AX 4 pes x 2 Bolt SU — #Bx3pesx2 Bolt #C x4 pcs x 2 Hex Nut [rT #D x11 pes x2 Flat Washer ree, #E x11 pes x 2 Lock Washer #F x1 pc Allen Wrench preen— #G x1 pc Wrench Note: The above pairs and hardware are shown for a complete 5 assembly of ONE chair.
#B x3 pcs #0 x 3 pes #E x3 pcs Place the backrest with legs (#1) on a protected surface. Align the seat (#2) with the per-drilled holes of the backrest with legs Prepare 3 bolt assemblies by inserting FIRST the lock washer (#E) onto the bolt (#B) and then the flat washer (#D) onto the SAME bolt in that order.
#C x4 pes #D x 4 pcs #E x 4 pcs 1. Align the 2 front legs (#3) with the per-drilled holes on the corners of the seat ll. Insert FIRST the flat washer (#D) onto the threaded stud of the front legs (#3) and then the lock washer (#E) onto the SAME stud, in that order. Secure the hex nut (#C) sonic the same stud using the wrench (#G) to tighten the parts together. Carefully place the completed chair in upright position.
