Assembly Instructions ASSEMBLY RATING The Assembly Rating is a 5-point system that shows the degree of effort needed in assembling a specific product (with 1 being easy and 5 being difficult). For some products, two persons are recommended.
Before you begin, please read Page 2 of “Assembly and Care Advice”. And remember, do not tighten until each step is completed or instructed. Parts List Hardware List — #1x1pc #A x 8 pcs Table Top Hex Nut pcs Leaf H Lock Washer pcs #C x 8 pcs Leg Fiat Washer Wrench Due to the size and/or weight of this product, it is highly recommended that the assembly should be done near the area of its intended location. Make sure you have enough space to move around during the assembly.
#A x 8 pcs #B x 8 pcs #C x 8 pcs With the help of another person, carefully place the table top (#1) facing down on a protected surface. Align the 4 legs (#3) with the per-drilled holes on the bottom corners of the table top Insert FIRST the flat washer (#C) onto the threaded stud of the legs (#3) and then the lock washer (#B) onto the SAME stud, in that order. Secure the hex nut (#A) onto the same stud using the wrench (#D) fo tighten the parts together. Carefully turn the completed table upright.
To insert the leaf unlock the latches located under the table fop Once unlocked, slide outward on both ends of the outer two piece table top (#1) until there is sufficient opening to place the leaf Then slide inward on both ends of the outer two-piece fable top (#1) until they are touching and sitting flush with the leaf Secure the parts together by locking the latches located under the table top ASSEMBLY IS COMPLETED Page 5 of 5
