Installation & Assembly

Step 2
Step 3
Put the Metal Strip(⑤) onto the assembled table base (C) ensuring the shapes
aligned completely with their screw holes matching.
Attach the Metal Strip(⑤) to the Table Base ( C + B ) using Bolts(②) and Flat Washer
Rings(④) with Allen Key(⑦) as shown in Picture.
Do not fully tighten the Bolts.
Attach Plastic Washer(③) and Mounting Bars(⑥) to the Table Base using Bolts(①) and
Flat Washer Rings(④) with Allen Key(⑦) as shown in Picture.
Plastic Washer(③) must be attached between Table Base and Mounting Bars(⑥).
Do not fully tighten the Bolts.
Page 4 OF 6