ASSEMBLY INSTRUCTION � Ax36 � Bx36 Fx4 a3.5x15mm Cx34 Dx 12 �� 0 � � � � LED Jx3 -muumu::@ a3.
Attach glass clamps(G) to panel(2&5) with screw(D) as below Attach glass clamps(G) to panel(3) with screw(D) from both sides as below
Attach glass clamps(G) to panel(3) with screw(D) from both sides as below Screw cam bolts and insert wood dowels into panel (8) Attach bottom Legs(F) to backside of panel(8) with screw(E) as below
Screw cam bolts and insert wood dowels into panel(2&5) Attach panel(2&5) to panel(6) with cam and locked as below Attach panel(8) to panel(2&6&5) with cam and locked as below
Attach panel(3&3) to panel(8) with cam and locked as below Screw cam bolts and insert wood dowels into panel(1) as below
Attach panel(1) to carcass with cam and locked as below Screw cam bolts into panel(4&4) as below
Attach panel(4&4) into carcass with cam and locked as below Attach LED aluminium bar to glass(7&7&7) as below Put glass into carcass respectively as below Connect adapter to power interface of LED controller.
Connect power adapter to the control box as below Remove the battery protection pad from remote controller Align remote controller to the control box to adjust color mode.
