Assembly Instructions Caution: You must read this before you proceed Sofa Parts List Label Picture Description QTY(pc) A Seat Base 1 B Backrest 1 C Seat Cushion 2 1
D Left Arm 1 E Right Arm 1 F Pillow 2 G Leg with 1 Plastic Gasket 5 Description QTY ① Plastic Gasket 7 ② Allen Key 1 ③ Spring Ring 12 ④ Flat Gasket 12 ⑤ bolt(M8*60mm) 12 Hardware List Label Picture 2
Assembly Preparation Before Begining Assembly: 3
Assembly Steps Backrest(B) Pillow (F) Left Arm (D) Right Arm (E) Leg with 1 Plastic Gasket(G) Seat Cushion(C) Seat Base(A) FRONT FACING Leg with 1 Plastic Gasket(G) This Sofa has multiple parts and may require about 30 minutes to assemble. To give you an overview of the Sofa parts, the above picture is to help you put the various parts into perspective. Please read through the instructions below to familiarise yourself with the parts and steps before assembly.
Step 1 A Carton Package C D E C Take the Left Arm (D), Right Arm(E),and Seat Cousions(C) out from the carton "A" and place them on a clean, non-marring surface. Step 2 B Carton Package A B F F Small box Take out the Seat Base(A), Backrest(B), Pillows(F) and a small box from the Carton "B", place them on a clean, non-marring surface.
Step 3 G Small box ③ ④ ② ⑤ ① Open the Small Box to take out the 5 Wooden Legs (G) and Hardwares.
Carefully install the Wooden Legs(G) at the bottom of Left Arm(D) and Right Arm(E). Insert threaded stem into the mounting position at the corner of Left Arm(D) and Right Arm(E). Tighten by turning the Legs clockwise. Take care of the shape of the Legs and ensure they in the correct postions. Note:The use of Gaskets are OPTIONAL and are especially useful to help alleviate slight wobbleness. Some Legs may need more than one gasket while some legs may not need anyny.
With assistance from your adult partner, postion Left Arm(D), Right Arm(E) and Seat Base(A) facedown on a clean, non-marring surface, then attach using Bolts(⑤), Spring Washers(③) and Washer(④) with Allen Key(②). Pls don't tighten the bolts and just to be bolted half-way at the moment(until to the Step 9). Step 6 A A ① G Carefully install the Wooden Leg(G) at the bottom of Seat Base(A).
Step 8 a b c ② ⑤ ③ ④ Insert the botls(⑤) half-way starting at “a” then to “b” and “c”. b a c Then tight the 3 Bolts with Allen Key(②) Secure Backrest(B) to the bottom of Seat Base(A) using Bolts(⑤), Spring Washers(③)and Washers(④) with Allen Key(②). Insert Bolts(⑤) half-way starting at “a” then to “b” and “c”.
Step 9 E D ② Then to tight the Bolts(⑤) with Allen Key(②). Tight the Bolts on each side of Arm with the Allen Key(②).
Step 10 C C B D E A A Place the Seat Cushions(C) on the Seat Base (A). Step 11 F F B D C E A A A C Place the Pillows(F) on the Sofa. Your Sofa is ready for use. This Sofa can only be used on a flat, level surface.
