Caution : You must read this before you proceed Club Chair Page 1 OF 6
Label Description QTY A Backrest 1 B Seat 1 C Leg 4 Description QTY Gasket 7 Label ① Picture Picture Before Beginning Assembly: Page 2 OF 6
Overview Backrest(A) Seat(B) Leg(C) FRONT FACING This Club Chair has multiple parts and may require up to 30 minutes to assemble. To give you an overview of the Club Chair, the above picture is to help you put the various parts into perspective. Please read through the instructions below to familiarise yourself with the parts and steps before assembly. Step 1 Seat(B) Position the Seat(B) on its back on a clean, non-marring surface as above.
Step 2 Seat(B) Use Gaskets(①) to acheive stablity Gasket(①) Leg(C) Install the first Leg(C) into the base of the Seat(B) by placing one Gasket(①) onto the threaded stem. Insert the threaded stem of the Leg(C) into one of the mounting positions of the Seat(B), then tighten by turning the Leg clockwise until it is completely secure. Repeat this process with the remaining three Legs. Note: The use of the Gaskets are OPTIONAL and are especially useful to help alleviate slight wobbles.
Step 4 Your Club Chair is ready for use. This Club Chair can only be used on a flat, level surface.
Page 6 OF 6
