Assembly Instructions

Step 2
Step 3
Position yourself behind the Seat(B).
Lift up the Backrest(A) and align it with the Seat(B).
While tilting the Backrest(A) slightly forward, lower the Backrest into the slot in the Seat.
Then gently pull the Backrest(A) towards you while pushing it down all the way into the Seat(B).
Install the first Leg(C) into the base of the Seat(B) by placing one Gasket(①) onto the threaded stem.
Insert the threaded stem of the Leg(C) into one of the mounting positions of the Seat(B), then tighten
by turning the Leg clockwise until it is completely secure.
Repeat this process with the remaining three Legs.
Note: The use of the Gaskets are OPTIONAL and are especially useful to help alleviate slight
wobbles. Some Legs may need more than one whilst some Legs may not need any.
Use Gaskets(①)
to acheive stablity
Leg(C)
Seat(B)
Backrest(A)
Seat(B)
Gasket(①)
Page 4 OF 6