Installation Instructions

INSTALLATION INSTRUCTIONS
1.Carefully remove the fixture out of the carton, and check that all parts are included referring to the
above illustration. Make sure not to misplace any parts that are needed for the installation;
2.Assemble the tube (4) together using the nipple (5), then attach the bottom end of tube (4) Into the
coupling (6) tightly, Then screw the nipple (3) into the tube (4).
3.Fixture is ready for lamping and installation.
CANOPY (1)
BALL NUT (2)
NIPPLE (3)
TUBES (4)
NIPPLE (5)
COUPLING (6)
SOCKET (7)