Owner Manual (Ottoman)

ManualsBrandsWade Logan Manuals2 Person Patio Conversation SetsIsaacson Solid Wood 2 - Person Seating Group with Cushions

OTTOMAN

CAUTION: You should read this before proceeding

CAUTION: This Ottoman is NOT a TOY.

Keep your child / children at bay in the process of assembly.

For turning the Ottoman and to prevent damage to the Ottoman, 02 people

may be needed to execute this action.

Please look in the Seat Panel for hardware packs

Assembly Instuctions

1 of 7

Summary of content (7 pages)

PAGE 1
Assembly Instuctions OTTOMAN CAUTION: You should read this before proceeding Please look in the Seat Panel for hardware packs CAUTION: This Ottoman is NOT a TOY. Keep your child / children at bay in the process of assembly. For turning the Ottoman and to prevent damage to the Ottoman, 02 people may be needed to execute this action.
PAGE 2
Parts List Label Picture Description Qty A Seat Panel 1 B Leg 2 C Cushion 1 Description Qty ① Bolt (M6*40mm) 5 ② Allen Key 2 Hardware Label Picture 2 of 7
PAGE 3
Assembly Preparation Before Beginning Assembly: Assembly Steps OVERVIEW Cushion (C) Seat Panel (A) Leg (B) FRONT FACING This Ottoman has multiple parts and may require up to some 30 minutes to assemble. To give you an overview of the Ottoman, the above picture is to help you put the various parts into perspective. Please read through the instructions here below to familiarise yourself with the parts and steps before assembly.
PAGE 4
Step 1 Unpack and place all parts on a clean, non-marring surface. Step 2 Position the Seat Panel(A) and the Leg(B) as shown in the above picture. Then secure the Ottoman Top(A) to the Leg(B) using 2 Bolts(①) and the Allen Key(②). Do not fully tighten the Bolts at this time.
PAGE 5
Step 3 Position the Leg(B) to the Seat Panel(A) as shown in the picture above. Repeat the same process of Step 2 to secure the Leg(B) to the Seat Panel(A) using 2 Bolts(①) and the Allen Key(②). Do not fully tighten the Bolts at this time. Step 4 Place the Ottoman onto a flat, level surface. Then EXERT pressure, floorwards, onto the Ottoman with both hands. This pressure will help the Ottoman reach full alignment at all joints.
PAGE 6
Step 5 Turn the Ottoman right side up. Place the Cushion(C) onto the Seat Panel(A) as shown in the above picture. Tie the velcro straps of the Cushion(C) to the Seat Panel(A). Your Ottoman is ready for use. This Ottoman can only be used on a flat, level surface.
PAGE 7
of 7