Outdoor Wicker Loveseat & Coffee Table
PART LIST C B A Right Arm Panel 1 PC Left Arm Panel 1 PC G F D Seat Panel 1 PC Back Panel 1 PC I H Table Leg 4 PCS Table Panel 1 PC E Seat Cushion 1 PC Back Cushion 2 PCS HARDWARE LIST #2 #1 M6*15mm Short Bolt 24 PCS (Extra 1) #3 M6*30mm #4 M6mm Long Bolt Flat Washer 8 PCS (Extra 1) 32 PCS (Extra 1) 2 M6mm Allen Wrench 1 PC Leg 4 PCS
Step 1. Lay right arm panel (part A) upside down on a soft flat surface, such as carpet, as shown below. Attach back panel (part D) to right arm panel (part A) using long bolt (part #2), flat washer (part #3) and allen wrench (part #4). NOTE: Please do not fully tighten bolts until unit is fully assembled. D #4 A #2 #3 #2 x1 #3 x1 #4 x1 Step 2. Attach seat panel (part C) to right arm panel (part A) and back panel (part D) using long bolts (part #2), flat washers (part #3) and allen wrench (part #4).
Step 3. Attach left arm panel (part B) to back panel (part D) and seat panel (part C) using long bolts (part #2), flat washers (part #3) and allen wrench (part #4). NOTE: Please do not fully tighten bolts until unit is fully assembled. #3 B #2 D С #4 #2 x3 #3 x3 #4 x1 Step 4. Сarefully turn assembled unit upside down. Attach legs (part E) to assembled unit (parts A, B & D) using short bolts (part #1), flat washers (part #3) and allen wrench (part #4).
Step 5. Carefully turn unit upright. Add seat cushion (part H) and back cushions (part I) as shown below.
Step 6. Lay table panel (part F) upside down on a soft flat surface, such as carpet, as shown below. Attach table legs (part G) to table panel (part F) using short bolts (part #1), flat washers (part #3) and allen wrench (part #4). NOTE: Please fully tighten all bolts at this time. G #4 G G #1 #3 F G Step 7. Carefully turn assembled unit upright as shown below.
