Assembly Instructions

Step 3. Attach each leg (P5) to the bottom of Seat Cushion (P1).
Step 4.
1) T
urn the assembled bench to an upright position. Attach the other side arm supports A/B (P2/P3) to the
Arms (P4). Securely tighten all bolts.
2) Attach wooden plugs (H9) to each bolt hole, tighten with rubber hammer to knock the wooden plug till its
tighten. Note: use a soft cloth between the wooden plug and hammer to prevent damage to wooden plug
finish.
3)
Assembly is complete. Failure to follow these instructions may cause the bolts to misalign during
assembly.
ADDITIONAL NOTE ABOUT SAFETY: BOLTS MAY LOOSEN DURING NORMAL EVERYDAY USE. THEY SHOULD BE
PERIODICALLY INSPECTED AND RE-TIGHTENED TO PREVENT DAMAGE OR INJURY. ALWAYS CHECK TO BE SURE THAT ALL
HARDWARE IS KEPT TIGHTENED.
(H5)x2
(H6)x2
(H7)x2
(H8)x1