Installation & Assembly

Table Of Contents

M6X14MM

M10

M6X40MM

M6X45MM

M6X18 MMX1.2

(1)X1

(6)X4

(6)

(4)

(5)

(6)

(1)

(11)

(2)

(9) (9)

(9)

(6)

(7)X4

(8)X4

(9)X4

(10)X8

(11)X1

(12)X1

(2)X4

(3)X4

(4)X4

(5)X4

Step 1:Assemble chrome feet(5) to wood leg(4) as shown.

Step 2:Use screw(6) and flat washer(9) with allen wrench(11)

to assemble metal bracket(2) to the bottom of table.Please

make sure"Long Side" of metal bracket(2) to attach on the table

bottom panel as shown.

Attention:50% assembling for screws of this step only.

Long Side

t Si

50%

page 1 of 3

PAGE 1
(1)X1 (3)X4 (2)X4 (4)X4 (6)X4 (5)X4 M6X14MM (8)X4 (7)X4 M6X45MM (9)X4 M6X40MM 1 (10)X8 M6 M6X18 X1.2 MM 2 (11) (6) (9) (6) (9) (4) (12)X1 (11)X1 M10 M6 50% (6) (9) (6) (9) Sh or tS ide (2) Long Side (1) Step 2 :Use screw(6) and flat washer(9) with allen wrench(11) (5) Step 1 :Assemble chrome feet(5) to wood leg(4) as shown. to assemble metal bracket(2) to the bottom of table.Please make sure"Long Side" of metal bracket(2) to attach on the table bottom panel as shown.
PAGE 2
(1)X1 (3)X4 (2)X4 (4)X4 (6)X4 (5)X4 M6X14MM (8)X4 (7)X4 M6X45MM (9)X4 M6X40MM 3 (10)X8 (12)X1 (11)X1 M6 M6X18 X1.2 MM M10 M6 4 (4) (7) (7) (10) (10) Middle Hole (4)Outside (4)Inside (12) (3) Top Hole (10) (7) (1) Step 3 :Please put "X" metal cross(3) on the table panel(1) and make sure each leg of metal cross(3) are put with the right position & direction as shown.
PAGE 3
(1)X1 (3)X4 (2)X4 (4)X4 (6)X4 (5)X4 M6X14MM (8)X4 (7)X4 M6X45MM (9)X4 M6X40MM (10)X8 M6 M6X18 X1.2 MM 64 5 (12)X1 (11)X1 1 M10 M6 100% 100% (4) (8) (8) 100% (10) (10) Middle Hole 2 (4)Outside ( 4 ) Inside 3 (12) Top Hole 50% (8) (11) (10) (10) (8) Step 5 :Use screw(8) and nut(10) from the "Middle Hole" of wood leg(4) with allen wrench(11) and open spanner(12) to assemble wood leg(4) and metal cross(3) togther.