Installation & Assembly

3
4
M6X14MM
M6
M6
M10
M6X40MM
M6X45MM
M6X18 MMX1.2
(1)X1
(6)X4
(7)X4
(8)X4
(9)X4
(10)X8
(11)X1
(12)X1
(2)X4
(3)X4
(4)X4
(5)X4
page 2 of 3
(3)
(1)
(4)
(7)
(7)
(7)
(7)
(10)
(10)
(10) (10)
(12)
(11)
50%
Step 3:Please put "X" metal cross(3) on the table panel(1) and
make sure each leg of metal cross(3) are put with the right
position & direction as shown.
Step 4:Insert wood leg(4) top end to the Short Side" of metal
bracket(2) and use screw(7) and nut(10) from the "Top Hole" of
wood leg(4) with allen wrench(11) and open spanner(12) to fix
the leg as shown.
Attention:Please make sure"Big Hole Side" of wood leg(4)
keeps the same direction with the table panel outside and 50%
assembling for screw of this step only.
"
Middle Hole
Top Hole
(4)Inside
(4)Outside