Installation & Assembly

4
M6X14MM
M6
M6
M10
M6X40MM
M6X45MM
M6X18 MMX1.2
(1)X1
(6)X4
(7)X4
(8)X4
(9)X4
(10)X8
(11)X1
(12)X1
(2)X4
(3)X4
(4)X4
(5)X4
page 3 of 3
5
6
(8)
(8)
(8)
(8)
(10)
(10)
(10) (10)
100%
100%
100%
1
2
3
(12)
Middle Hole
Top Hole
(4)Inside
(11)
(4)
(4)Outside
Step 5:Use screw(8) and nut(10) from the "Middle Hole" of
wood leg(4) with allen wrench(11) and open spanner(12) to
assemble wood leg(4) and metal cross(3) togther.
Attention:Please make sure"Big Hole Side" of wood leg(4)
keeps the same direction with the table panel outside and 50%
assembling for screw of this step only.
Step 6:Please 100% full tighten all screws(6)/(7)&(8) & nuts
(10) of Step 2, Step 4 and Step 5 and then put the table on the
floor as shown and adjust the chrome feet(5) to make sure all
four legs are balanced.
Congratulations! Table Assembling Is Finished !
50%