Installation & Assembly

Page 7
5. Check that the control knob for the gas
supply system is turned to the “OFF” position
before starting any assembly.
6. Remove door from body and place
propane gas tank (not included) into the metal
stand inside of the body .
CYLINDER VALVE
PRESSURE
RELIEF VAL
VE
BLEED-OFF
VALVE
BLACK COUPLING NUT
REGULATOR
turn clockwise to connect
turn clockwise
to reseal
7. Turn the cylinder valve on the tank
clockwise to close the propane tank.
Attach the pr
eassembled regulator
from the body to the cylinder valve
by turning the regulator coupling nut
clockwise. Make sure it is fastened
securely and tighten connections by hand
only.