Installation & Assembly

Table Of Contents

ASSEMBLY INSTRUCTION

A X 1pc

B X 4pcs

C X 12pcs

D X 1pc

Please read the instructions carefully before assembly and make sure you have the parts & hardware as

identified on the list.

It is highly recommended to assemble the chair on a soft clean surface to avoid scratches .

RECOMMEND ASSEMBLE THE PALSTIC LEGS IF

YOU PUT THIS SET ON UNEVEN SURFACE.

PAGE 1
ASSEMBLY INSTRUCTION A X 1pc Please read the instructions carefully before assembly and make sure you have the parts & hardware as identified on the list. It is highly recommended to assemble the chair on a soft clean surface to avoid scratches . 2 1 D C B X 4pcs A C X 12pcs B RECOMMEND ASSEMBLE THE PALSTIC LEGS IF YOU PUT THIS SET ON UNEVEN SURFACE.
PAGE 2
INDOOR BARSTOOL INDOOR BARSTOOL ASSEMBLY INSTRUCTION
PAGE 3
***Do not fasten the bolts before finishing all steps. 1. Place the Stool Leg#2 (C) over Stool Leg#1 (B) in the position shown in Photo 1. Locate the Footrest (D) to the legs by aligning the pre-drilled holes and fasten the Bolt (F) with the Allen Key (E). Each leg should have one Bolt (F).
PAGE 4
2. Locate the legs to the Seat (A) by aligning the pre-drilled holes and fasten the Bolt (F) with the Allen Key (E). Four Bolts (F) are needed in this step. (Photo 2) Till now you have finished the whole assembly.