Installation & Assembly

ManualsBrandsWade Logan ManualsGarden Outdoor BenchesJamieson Outdoor Wooden Bench

Assembly Instructions

Caution: You must read this before you proceed

Bench

Caution: This Bench is NOT a TOY.

Keep your child / children at bay during the assembly process.

Whenever lifting or moving the Bench and to prevent damage to the Bench, two adults

may be needed to execute these actions.

Summary of content (6 pages)

PAGE 1
Assembly Instructions Caution: You must read this before you proceed Bench Caution: This Bench is NOT a TOY. Keep your child / children at bay during the assembly process. Whenever lifting or moving the Bench and to prevent damage to the Bench, two adults may be needed to execute these actions.
PAGE 2
Parts List Label Picture Description QTY A Seat Panel 1 B Leg Panel 2 C Leg Support Bar 1 Description QTY ① Bolt (M8*40mm) 5 ② Screw (M6*60mm) 3 ③ Allen Key 2 Hardware Label Picture
PAGE 3
Assembly Preparation Before Beginning Assembly: Assembly Steps Overview This Bench has multiple parts and may require up to 30 minutes to assemble. To give you an overview of the Bench parts, the above picture is to help you put the various parts into perspective. Please read through the instructions below to familiarise yourself with the parts and steps before assembly.
PAGE 4
Step 1 Unpack and place all parts on a clean, non-marring surface. Step 2 Attach Leg Panel(B) to Seat Panel(A) using Bolts(①) with Allen Key(③) as shown above. Do not fully tighten the Bolts. Repeat the same process with the remaining Leg Panel(B).
PAGE 5
Step 3 Insert the tenon of the Leg Support Bar(C) into the mortise of Leg Panels(B) . Attach Leg Support Bar(C) to Leg Panels(B) using Screws(②) with Allen Key(③) as shown above. Do not fully tighten the Screws. Step 4 Stand the Bench up, with assistance from your adult partner. Exert pressure floorwards, onto the Bench with both your hands. This pressure will help the Legs and Seat reach full alignment status. Check for wobbles on a LEVEL surface.
PAGE 6