ASSEMBLY INSTRUCTIONS ir TOOLS REQUIRED Philips Screwdriver {Not Included) [od 2 Persons Recommended EASY movement DIFFICULT Thai Assembly Rating is a S-point system showing the level of effort needed to assemble a specific product, 1715
CHECK BEFORE STARTING Are you missing anything? Double-check all parts, hardware and accessories sifted on Page 6 are accounted for Check out our Quick Tips! We recommend reviewing the per-assembly handouts. Even experts need a refresher now and then! Prep Time! Please review the assembly instructions and ali diagrams prior to assembling. Arrange pairs as recommended on Page 7 and group identical hardware together to make assembling easier.
PRE ASSEMBLY INTRODUCTION We understand building ready-to-assemble furniture can be a challenging experience for some. To help avoid confusion, we have provided some helpful tips that may speed up the process. Teamwork ALWAYS have at least two people 10 help with unsporting and assembling the product to avoid potential injury and/or damage. Suitable Location Assembling near the area of the intended location is highly recommended.
ASSEMBLY AND CARE ADVICE A FAILURE TO FOLLOW THE GUIDELINES BELOW MAY RESULT IN INJURY AND/OR PROPERTY DAMAGE. 4 \ Turn clockwise tg tighten and only tighter whee step is completed or when instructed fo do so. Position each part correctly and insert screws or bolts into their respective holes. Use the appropriate hand tools ar prows tools for assembly. Select steps, such as lightening resews and/or bolts, may require hand tools to avoid causing damage during assembly.
CAM LOCK FASTENER ASSEMBLY INSTRUCTIONS Note © NN Every cam lock boil must have a cam 3 lock connector in order to fasten the parts together. cam bolt cam lock screwdriver Screw the cam Insert the cam bolt into the bolt into panel. bolt hale of joint panel. Align the cam lock with its side opening Turn the cam lock clockwise gently {or arrow) pointing to cam bolt. until it will not turn any more.
END TABLE » Please cheap instructions for future reference. « Check the ubiquity and regularity of pairs dnd hardware before you start.
END TABLE » Please cheap instructions for future reference. « Check the ubiquity and regularity of pairs dnd hardware before you start. aE Es D PCs PCs {C) PCs PCs B23) Large Cam Bolt 1.
ASSEMBLY INSTRUCTIONS 1 Part @ x1pc Part @® x1pc Remove slide track and open Cam Lock Noel. Tip: Place parts on the flat level surface to ease alignment and assemble.
ASSEMBLY INSTRUCTIONS Attach cam bolts (£4) to the holes of the rear left and right legs Align drawer bottom support 3 (#12) to the cam boils (#A} of rear left and right legs Secure by using cam locks (#8) Part{ expert Part? x1pc Part&9 xtc Hardware@ PCs Hardware apexes 4 Hardware red Apexes Hardware re PCs Attach cam bolts (#A} and dowels (#C) fo the holes of the legs and bottom support Hardware@0 x1pc Align side panels (45,6) and crossbar (#4) to the cam bolts (#4) and dowels Secure by using cam locks (#5
ASSEMBLY INSTRUCTIONS “Almach cam bolts (HA) io (he holes of the legs Align bottom panel (#2) to the cam bolts (4A) of the legs Secure by using cam locks (8). Part ¢2) x1pc Hardware) PCs Hardware) PCs ‘Attach cam bolts (¥A) to the holes of the legs Align lags to the holes of the product. Secure by using cam lacks (4H).
ASSEMBLY INSTRUCTIONS 8 Part @ripe Hardware@) x10pcs Reattach drawer rails to side panels Attach cam bolts (#A) wo the holes of the top panel (#1) 11/18
ASSEMBLY INSTRUCTIONS 9 Hardware() x PCs Hardware) PCs Hardware re(@) dopes 10 Hardware(®) PCs Attach dowels (#C) to the holes of the top panel (31}, then align top panel (#1) to the holes of the base.
ASSEMBLY INSTRUCTIONS Align handles fo the front drawer panel then secure by using bolts and washers Part Ex pc Hardware) expel Hardware(H) x pc Align side drawer panels to the holes of the back drawer panel 1 2 then secure by using scows #Fx docs #F Part (xp on Part (39x 1pe a Part Gd x 1pc oer HO Hardware) x PCs so 18/718
ASSEMBLY INSTRUCTIONS “Align and slide bottom panel (#11) brought the their lined gaps of the drawer panels 13 Part @)x pc (#7) to the holes of the drawer.
