Disassemble drawer slider (R) by sliding the slider arm and slider bracket apart. Depress the small lever of the slider bracket and carefully pull the two pieces apart. Repeat this process for both drawer sliders (R). Secure slider arm (R) to side panel (3,5) with screw (Q).
Insert wooden dowel (A) into side panel (3,4,5). Secure cam bolt (B) to drawer front panel (8) and top panel (1,2).
Use wrench (N) to secure bottom panel (6) to side panel (3,4,5) with bolt (H). Slide back panel (7) into grooves as per diagram.
Insert top panel (1,2) into side panel (3,4,5), then insert and secure cam lock (C) to side panel (3,4,5) to lock it. Use wrench (N) to secure leg (13) to part (14) with bolt (E).
Use wrench (N) to secure leg (13) and part (14) to bottom panel (6) with bolt (F) and washer (G). For optional added stability, secure plastic wedge (L) to back panel (7) with screw (K).
Secure drawer side panel (9,10) to drawer back panel (11) with screw (J), then slide drawer bottom panel (12) into grooves as per diagram. Insert drawer front panel (8) into drawer side panel (9,10), then insert and secure cam lock (D) to drawer side panel (9,10) to lock it.
Secure slider bracket (R) to drawer side panel (9,10) with screw (Q). Place sticker (M) over holes as per diagram.
Hold and push the drawer to reattach drawer sliders (R).
