General Assembly Guidelines I. Ensure that all parts and hardware are available before beginning assembly. II. Follow each step carefully to ensure the proper assembly of this product. III. Two people are recommended for ease in the assembly of this product. IV. The three main types of hardware used to assemble this product are : wood dowels , screws and bolts. V. The provided glue is to secure wood dowels in place .
Parts List 1 6 5 4 3 7 8 7 9 10 9 2 11 11 11 12 11 14 13 All rights reserved. P.
Attach door stopper (K) to part (1) using screw (L) with screwdrivers。 Attach cam bolt (B) to part (1) with screwdriver.
Step 3 11 11 2 12 11 F F G F 11 Use hex key(G) to secure bolt (F) into part (2). Step 4 A A A 3 5 4 A A A A A 6 A A A A A A A A Insert wooden dowel (A) into part (3,4,5,6). All rights reserved. P.
Attach part (3,4,5,6) to part (2) using bolt (E) with hex key (G) Slide back panel (7,8) into grooves as per diagram.
Attach part (1) to part (3,4,5,6), then insert and secure cam lock (C) to part (3,4,5,6) to lock it Attach plastic wedge (V) to part (7,8) using screw (U) with screwdriver.
Place sticker (D) over holes as per diagram. Insert shelf support pin (H) into part(3,4,5,6).
Place shelf (9) on top of support pin . Place plastic pivot (P) over holes as per diagram.
Attach handle (S) to part (13,14) using handle bolt (T) with screwdriver. Attach door hinge (M,N) to part (13,14) using screw (Q) with screwdriver. Attach bolt (R) to part (13,14) with screwdriver. Insert top door hinge (M) into plastic pivot (P) on part (1), then slide the door (13) into bottom hinge (N). Secure door by tightening door hinge (N) using screws (Q) with equal pressure.
Insert top door hinge(N) into plastic pivot (P) on part (1), then slide the door (14) into the bottom hinge (M). Secure door by tightening door hinge (M) using screws (Q) with equal pressure. Insert glass holder (J) into part(4,5).
Step 17 10 Place glass shelf (10) on top of glass holder carefully. Step 18 Final Assembly All rights reserved. P.
