Assembly Instructions
Table Of Contents
PARTS # PARTS NAME QTY
P1
WOOD LEGS
4
P2
PLASTIC
WASHER
4
P3
BACKREST
1
P4
SEAT
1
1. Take out four legs and washers from the box which is in the seat.
3.Smooth down the fabric flap on the Chair Backrest.Run your hands down both sides of
the flap,from top to bottom,allowing the velcro tape to adhere to the flap under the seat of
the chair.
2. Turn the chair upside down and lay on protective carpet. Screw in the wood legs (P1)
using Plastic Washer (P2) for each. Screw tight to the right angle. Insert the small metal
arms on the sides of the Chair Backrest(P3) into the prefabricated slide lock gadget onthe
Chair Seat(P4) as shown above.
Assembly Instruction---Recliner Chair
DRAWING
P3
P1
P1
P1
P1
P4
P2
P1