Installation & Assembly

Step 5

ADDITIONAL NOTE ABOUT SAFETY: BOLTS MAY LOOSEN DURING NORMAL EVERYDAY USE. THEY SHOULD BE

PERIODICALLY INSPECTED AND RE-TIGHTENED TO PREVENT DAMAGE OR INJURY. ALWAYS CHECK TO BE SURE THAT ALL

HARDWARE IS KEPT TIGHTENED.

Step 4. Attach seat cushion (C) to left arm (B) using bolt (a), lock washer (b) and flat washer (c). Loosely tighten

by Allen wrench (e).

Step 5. Turn the assembled loveseat to a upright position. Securely tighten all bolts by Allen wrench (e), but do not

over tighten the bolts. Then attach wooden plug (f) to each bolt hole, tighten with Rubber hammer to knock the wooden

plug till its tighten. Note : use a soft cloth between the wooden plug and hammer to prevent damage to wooden plug finish.