COUNTER HEIGHT SQUARE TABLE Page 1 OF 4
Assembly Instruction ASSEMBLY TIPS: 1.Remove hardware from box and sort by size, 2, please check to see that all hardware and parts are present prior to start of assembly. 3. please follow attached instructions in the same sequence as numbered to assure fast & easy assembly. Warning ! 1.Don’t attempt to repair or modify parts that are broken or defective, please contact the store immediately. 2.This product is for home use only and not intended for commercial establishment.
Assembly Instruction STEP 1 Compose the SIDE PANEL A & B a s PEDESTAL. Place the WOODEN DOWEL to firm-up and use FLAT W ASHER,LOCK WASHER and BOLT to fix and fasten tight by ALLEN WRENCH. STEP 2 Put on PEDESTAL TOP BOARD and place FLAT WASHER,LOCK WASHER and BOLT to fix by ALLEN WRENCH.
STEPS Put on the TABLE TOP and BASE, use FLAT WASHER,LOCK WASHER and BOLT to fix and fasten tight by ALLEN WRENCH. STEP 4 Assembly complete.
