INCLUDED IH THE PACKAGE FEAR EW |[ pres view Shelf Lower.
[sleeve 1 « Fix the feet (17) under the Base (01) with bolts (A). « Apply the protective felt (M) on bottom of the feet (17). « Apply the plastic covers (B) on top of the bots (A). + Connect Partition (08) onto Shelf (05) with dowels (C) and bolt (D). » Connect parts (04), (06) and (07) Into the Shelf (05) with dowels (C) and Mini fix hardware (€ + F). [sere 2 « Connect Side Panels and Partitions (03), (04), (06) and (07) root Base (01) with dowels (C) and bolts (D).
[sere 4 « Connect Back Panels (09), (10) and (11) with nails (I), metallic plates (H) and profile (19). Preparing the Door (12): » Insert the plastic ring (N) in the Door (12). « Fix the hinges (1) in the Door (12) with bolts (K), as shown in DETAIL 2. severer a oo Preparing the Drawer: » Connect parts (13), (14) and (15) with dowels (C) and Infix hardware DETAIL 3. + Apply adhesive covers (G) on the mini fix hardware (F). + Insert the plastic ring (N) In the Front drawer (13).
[sere 7 + Install the drawer, fitting it so that the metallic slides slide smoothly. Installing the Door (12); » Fix the hinge connectors (J) of the Door (12) on the Left Side Panel (03) with bolts 3.5 x 14mm (K), taking the markings on the panel (03) as reference for correct positioning. The hinge connector includes two bolts, shown In DETAIL 5. Use the fixer bolt and the adjustment bolt to tighten, adjust and align the door.
