Assembly Instructions

Assembly Instructions (English)
IMPORTANT SAFETY INSTRUCTIONS:
This portable lamp has a polarized plug (one
blade is wider than the other) as a feature to
reduce the risk of electric shock. This plug will fit
in a polarized outlet only one way. If the plug does
not fit fully in the outlet, reverse the plug. If it still
does not fit, contact a qualified electrician. Never
use with an extension cord unless plug can be
fully inserted. DO NOT ALTER THE PLUG.
GENERAL PRODUCT INFORMATION:
This product is suitable
for dry locations only.
BULB TYPE: (1) 150 watt incandescent or 42 watt
CFL equivalent . (not included)
1.03565-01
3565-04
3565-09
2. Screw socket cup (A) clockwise into pole (B) to
tighten.
3.Screw pole (B) clockwise into pole (C) to tighten.
4. Screw pole (C) clockwise into pole (D) to tighten.
5.Screw pole (D) clockwise into pole (E) to tighten.
6.Screw pole (E) clockwise into pole (F) to tighten.
7.Screw pole (F) clockwise onto base (G) to tighten.
Then pull the remaining slack of the power cord
out carefully through point (H).
8.Set inner shade(J) onto outer shade(I) and both
shades onto socket cup(A). Then screw the socket
ring (K) onto the socket clockwise to secure the
shade.
ASSEMBLY INSTRUCTIONS FOR
1. Remove all parts and lay on a flat surface.
K
J
I
A
B
C
D
F
G
E
Point(H)
Floor Lamp