Installation & Assembly

TV Bracket and Mounng Assembly
Used for: Park, Cabrini, City, Morning Side, River-
side, Intrepid and Lincoln Collecons.
Instrucons:
 Bracket KIT includes screws that will accommodate: LCD, LED, and PLAS-
MA Tv’s. If you have another TV, contact the TV supplier for correct
parts.
 Note: This bracket will only accommodate flat and vertical walls, it will
not work for inclined surfaces.
 The kit is intended to be used on panels that are mounted to concrete,
brick or solid wood walls.
 The kit is intended to be used on panels that are mounted to concrete,
brick or solid wood walls.
 Manufacture is not responsible for problems caused by incorrect instal-
laon or applicaon of bracket.
 Maximum TV Weight: 177 Lbs.
1. Apply hardware parts on the TV
Use the specied screws as indicated with the TV manu-
facturer.
Use part “D” for instances when part “G” and “H” are
needed.
2 . Drill Panel
Check paern holes on your TV.
Use the drilling template.
Mark the Panel for xing support.
3. Mount Brackets on Panel
Fix part “A” and “I” as indicated in image.
4. Aach the TV
*If this is a oang vs. freestanding panel, make sure the
panel is correctly xed onto the wall.
Simply slide part “B” from the back of the TV into part
“A” that is on the panel.