Assembly Instructions

ManualsBrandsWade Logan Manuals4 Seat Kitchen & Dining TablesMorman Counter Height Extendable Pedestal Dining Table

Table Of Contents

Hardware kit

Description

Qty

Hex nut M8

Lock washer Ø8

Flat washer Ø8 x 16mm

Long bolt-Attaching Leg Extension

5/6" x 180mm

Medium bolt Attaching Leg M6 x 60mm

Short bolt Attaching Top/Bottom Panel

M6 x 30mm

Allen key K4

Key wrench 13

Wooden Screw Ø4 x 25mm

Wooden Dowel Ø10 x 20mm

Page : 1/2

Step 1

Lay the top of the Storage Box upside down on a clean padded

surface to prevent scratching. Insert the Wood Dowels (J) into

the Vertical Panel ends.

Attach the Storage Box Vertical Panel to the Top Panel with a

Short Bolt (F), a Lock Washer (B) and a Flat Washer (C) using

the Allen key provided.

Step 2

Attach the Bottom Panel to the Vertical Panel with a Short Bolt

(F), a Lock Washer (B) and a Flat Washer (C) using the Allen key

provided.

Slide the Side Panels into the grooves on the Top and Bottom

Panels as show in the diagram.

Step 3

Carefully lay the Shelf Unit on the side and attach a Right Side Leg

and a Left Side Leg to the top corners using a Bolt (E), a Lock Washer

(B) and a flat Washer (C).

Note that the groove in the leg will be on the inside of the unit.

Repeat for the other side. Make sure all bolts are securely tightened.

4 pcs

24 pcs

8 pcs

4 pcs

1 pc

8 pcs

4 pcs

2 x

8 x

MADE IN VIET NAM

HIGH/LOW RECTANGLE TO SQUARE TA

ASSEMBLY INSTRUCTIONS

& PARTS IDENTIFICATION

Summary of content (2 pages)

PAGE 1
ASSEMBLY INSTRUCTIONS & PARTS IDENTIFICATION HIGH/LOW RECTANGLE TO SQUARE TABLE Hardware kit No Description Qty A Hex nut M8 B Lock washer Ø8 24 pcs C Flat washer Ø8 x 16mm 24 pcs D Long bolt-Attaching Leg Extension 5/6" x 180mm 8 pcs 8 pcs 4 pcs E Medium bolt Attaching Leg F Short bolt Attaching Top/Bottom Panel M6 x 30mm 4 pcs G Allen key K4 1 pc H 13 Ø4 x 25mm 1 pc I Key wrench Wooden Screw J Wooden Dowel Ø10 x 20mm 4 pcs M6 x 60mm 8 pcs Step 2 Attach the Bottom Panel
PAGE 2
ASSEMBLY INSTRUCTIONS HIGH/LOW RECTANGLE TO SQUARE TABLE Step 4 Attach the shelves into place with the wood screws (I). Note there are two different size shelves. Step 5 Place the Table Base upright and position the doors in place. Note that the rollers go into the base track and the guide pins lock into the top track. Attach the Leg Extensions (for counter height table) using the Long Bolt (D), Lock Washer (B) and Flat Washer (C).