Owner Manual Fireplace Insert

PACKAGE CONTENTS

1. remove the 4 screws on the back left and

right sides of the firebox that bold the glass front

In place.

2. Carefully remove the glass front.

3. Arrange the acrylic crystal along the inset

window ledge at the glass front.

4. Reinstall the glass front.

5. Line up the holes on the front with the holes

On the firebox and insert and tighten 4 screws

To hold the glass front in place.

6. Find the 2 LED light bars from the package

and plug into the both side of the electric

fireplace.

Electric fire

lace

Remote control

2 AAA batteries

Acrylic crystals

2 LED li

ht bars

manual

INSTALLING THE ACRYLIC CRYSTALS AND SIDELIGHT

Thankyou

Thank you and congratulations on your

purchaseof our fireplace. Please read the

Installation instructions carefully before

usin

thisappliance.

CONSUMER SAFETY INFORMATION:

PLEASE READ THIS MANUAL BEFORE

INSTALLING AND OPERATING THIS APPLIANCE. FAILURE TO FOLLOW THESE

INSTRUCTIONS MAY RESULT IN A POSSIBLE ELECTRIC SHOCK, FIRE HAZARD ,

AND/OR INJURYAND WILLVOID THE WARRANTY.

WARNING: IF THE INFORMATION IN THIS MANUAL IS NOT FOLLOWED, AN

ELECTRIC SHOCK OR FIRE MAY RESULT IN PROPERTY DAMAGE, PERSONAL

INJURY,OR LOSS OF LIFE.

ELECTRIC FIREPLACE

HOMEOWNERS OPERATING MANUAL

• FA23V60L-C6

• FA26V60L-C6

MODELS

：

261046