Owner Manual Fireplace Insert

6
OPERATING INSTRUCTION
CONTROL PANEL ACCESS
Control panel can be access at upper-right corner of the appliance
OPERATION INSTRUCTION WITHOUT REMOTE
POWER
The POWER button turns the appliance on or off. It has a memory function; the button turns off all functions
at once but retains the settings in the memory. By pressing the button again, the unit will turn on at the same
settings. If the TIMER has set & time has expired all functions will stop. Press the POWER button start the
appliance.
FLAME
The FLAME control switch manages t he flame brightness. There are 4 bri
ghtness levels and an off position.
Each time the FLAME button is pressed, the intensity of the flame decrease. When adj usting the FLAME
button, a num ber indicating the brightness of flame will be visible on the digital display. After turning on digital
display, if nothing happens within 10 seconds, digital display will t urn off. There is a down light over the
ember bed. When the FLAME button is in the ON position, down light will turn on, it will turn off in OFF
position.
The FLAME button has locking function. Press and hold the FLAME button f or 5 seconds. The
down light
will turn off and the ember bed will flash 6 times, it is confirming the flame function is locked. When you
want unlock the flame function, repress and hold the FLAME button 5 seconds, the ember bed will flash 6
times, both the flame light and down light will keep the original states.
HEATER
The HEATER button turns the heater on and off. When in ON position, press and hold the HEATER button 5
seconds and enter temperature adjustment mode. In the adjustment mode, the digital display will flash at 0.5
second intervals. There are 11 t emperature
settings:7
2℉-74℉-76℉-78℉-80℉-82℉-ON-64℉---72℉(22℃-23℃-24℃-25℃-26℃-27℃-ON-18℃---22℃)
After the temperature is selected the digital display will flash 5 times and exit from setting status. After
turning on the digital temperature display, if nothing happen within 10 seconds, the digital display will expire.
Temperature unit convert function: With the heater is ON the position, press and hold the power icon for 5
seconds, current temperature unit display will flash 3 timers and convert to another temperature unit.
Lock & unlock
heater function: press and hold the heater icon for 10 seconds, the ember bed will flash 6
times, indicating that the heater function is lock ed. To unlock the heater function, just repress and hold the
heater icon for 10 seconds again, then the ember bed will also flash 6 times indicating the heater function is
unlocked and to recover the original states which you have set.
TIMER
The TIMER has adjustable setting at range from 30 minutes to 6 hours and OFF. As shown the following: 30
minutes-1h-2h-3h-4h-5h-6h-OFF. If the digital display turns on and not hing happens within 1
0 seconds, the
digital display will auto shut off. Once you have set the timer, and the timer is up, the ember bed will flash 6
timers and close all the functions and enter st andby m ode. In this mode, you should touch the power icon to
restart the appliance.