Installation & Assembly

www.coastercompany.com
1.Screw CamBolt(1)and Wood Dowel(9)
and Round Iron(7)onto Top Shelf(A).
on the screw hole after
tightening
STEP2.
STEP1:
ASSEMBLY INSTRUCTION
PAGE 4 OF 6
Install Glass Holder(G)
using Screw(18)
2.Attach Round Iron(7)using
Small bolt(6)and attach
Top Bar(E)using Small Bolt(6)
3.Insert Side Board(D)into
Top Shelf(A)then install
CamLock(2)and place Label(10)
4.Screw Glass Metal(4)and
Screw(18)onto Side Board(D)
1.Place Plastic(8)into Small Bolt(6)then
install Small Bolt(6)and Glass Metal(4)
onto Glass Shelf(B)and then tighten
with Glass Bolt(5)
2.Place Plastic(8)into Small Bolt(6)
then tighten with Top Bar(E).