Installation & Assembly

www.coastercompany.com
STEP3:
ASSEMBLY INSTRUCTION
PAGE 5 OF 6
1.Place Plastic(8)into Top Bar(E),screw CamBOLT(1)and
Wood Dowel(9)onto Side Board(D). Insert Bottom Shelf(C),
into Side Board(D)and tighten using CamLock(2)
2.Place Spring Washer(21)and Large Washer(16)onto Large Allen Bolt(11)
and then screw it to Bottom Shelf(C)with Top Bar(E)and Plastic(8)
3.Screw Bottle Guard(I)onto Side Board(D)using Screw(18),and screw
Bottle Guard(I)to Glass Shelf(B)using Small Allen Bolt(13)
and Small Washer(14)
4.Place Plastic(8)and Large Bolt(15)onto Bottom Bar(F),then install
Bottom Shelf(C)with Top Bar(E)using Bottom Bar(F).
Align Bottom Bar(F)and Bottom Shelf(C)then connect with
Bottle Guard(I).Then screw Bottle Guard(I)to the screw with Side Board(D)
using Screw(18)
5.Screw Medium Allen Bolt(12)onto Bottom Shelf(C)and assemble Bottom Bar(F)
with the Bottom Shelf(C)using the Plastic(8).Add Cap(17)to the
Bottom Bar(F)and make sure all screws are tightened.