HEADBOARD 63" This piece of furniture is made with non-toxic materials. Light odor could be noticed upon opening the box due to the nature of the packaging but it will dissipate quickly after assembly.
Check the quantities of boxes received Compruebe la cantidad de cajas recibidas During the assembly process, use the product box to protect the furniture and floor Durante el proceso de ensamble, utilize la caja del producto para proteger el mueble y piso Identify and separate each piece Identifique y separe cada pieza Do not use chemicals, clean only with a damp cloth and later with a clean, dry cloth No utilizar productos quimicos para limpiar el mueble.
PART 1 2 3 4 5 6 7 DESCRIPTION Side panel / Panel Lateral 11'5/8 X 4'3/8 X 3/4 Top panel / Panel Superior 62'5/8 X 4'3/8 X 3/4 Bottom panel / Panel Inferior 62'5/8 X 11'5/8 X 3/4 Center panel / Panel Central 54' X 11'5/8 X 5/8 Narrow cross / Travesaño Horizontal 53'1/8 X 2'3/4 X 3/4 Lower cross / Travesaño vertical 18'7/8 X 2'3/4 X 3/4 Support / Soporte 3'1/4 X 3'3/4 X 3/4 QTY 2 1 1 1 1 3 4 1"3/8 8 62"5/ 42" 1/2 B A 14X Dowel/Tarugo 8x30mm 6X Wall anchor Tarugo de fijacion C D 6X 26X Screw /
Parts identification numbers 00 Numero sellado de identificacion de pieza 5 7 6 Observe the finish on the side of the workpiece (6). 7 6 Observe the finish on the side of the workpiece (6). e e sid n th o h ).
A 1 14X 1 Dowel/Tarugo 8x30mm 1 To strengthen the structure, use glue on the dowels. Para reforzar la estructura, aplicar pegamento en cada tarugo.
2 BACK PANEL VIEW 4 VISTA POSTERIOR DEL PANEL 3 To strengthen the structure, use glue on the dowels. Para reforzar la estructura, aplicar pegamento en cada tarugo.
3 BACK PANEL VIEW 1 VISTA POSTERIOR DEL PANEL 4 1 To strengthen the structure, use glue on the dowels. Para reforzar la estructura, aplicar pegamento en cada tarugo.
4 BACK PANEL VIEW VISTA POSTERIOR DEL PANEL 2 To strengthen the structure, use glue on the dowels. Para reforzar la estructura, aplicar pegamento en cada tarugo.
BACK PANEL VIEW 5 D VISTA POSTERIOR DEL PANEL 26X Screw / Tornillo 3,5x30mm Observe the existing markup on the parts to fix the screws. Observar el marcado existente en las partes para fijar los tornillos. 7 6 5 Observe the finish on the side of the workpiece (5). 6 7 6 Observe the finish on the side of the workpiece (6).
7 Recommended for masonry walls - Ø ⅜ Recomendado para pared de concreto - Ø ⅜ B 6X Wall anchor Tarugo de fijacion 8 C 6X Screw / Tornillo 4,5x60mm 7
9
