TOOLS REQUIRED Phillips Screwdriver (Not Included) Hammer (Not Included) 2 - Persons Recommended ASSEMBLY RATING EASY DIFFICULT The Assembly Rating is a 5-point system showing the level of effort needed to assemble a specific product.
/ 15
/ 15
ASSEMBLY CARE ADVICE FAILURE TO FOLLOW THE GUIDELINES BELOW MAY RESULT IN INJURY AND/OR PROPERTY DAMAGE. Turn clockwise to tighten and only tighten when step is completed or when instructed to do so. Position each part correctly and insert screws or bolts into their respective holes. Use the appropriate hand tools or power tools for assembly. Select steps, such as tightening screws and/or bolts, may require hand tools to avoid causing damage during assembly.
/ 15
COFFEE TABLE A C B F PARTS A 1PC E 1PC J 1PC F 1PC K 2PCS G 2PCS L 2PCS H 2PCS M 2PCS I 2PCS N 1PC B 1PC C 1PC D 1PC ACCESSORIES HARDWARE 1 30PCS 2 30PCS 3 30PCS 4 8PCS A1 6PCS 1.97" 5 8PCS 6 8PCS 0.
GET READY Please group boards as below.
1 1 1 Hardware 1 x18PCS Hardware 3 x8PCS 1 1 A 1 3 1 A4 1 1 OPTIONAL Apply a dab of glue into dowel holes of panels before inserting dowels (#3).
2 3 Hardware 1 x12PCS Hardware 3 x22PCS A4 OPTIONAL 1 3 3 Apply a dab of glue into dowel holes of panels before inserting dowels (#3).
3 Part D x1PC Part G x2PCS G Hardware 2 x2PCS 2 G D Front 2 Top 1 2 Please refer to page 5 for detailed instructions on how to fasten cam locks (#2) to cam bolts (#1).
5 C Part C x1PC Hardware 2 x5PCS 2 2 2 2 E 2 Front 1 G Top F 2 6 A Part A x1PC Part B x1PC Part M x2PCS Hardware 2 x8PCS 2 2 2 B 2 M 2 C 2 M Top 2 2 Front 11 / 15
7 Top Hardware 5 x8PCS Hardware 6 x8PCS Front M M 5 6 Insert fixative plates (#5) through the thin lined gaps between back and side panels, then secure by using screws (#6).
9 Part J x1PC K Hardware 4 x4PCS Accessory A3 x1PC 4 A3 4 K Front J Top 4 4 4 10 Hardware 2 x4PCS C J 2 2 2 2 D Front 1 Top 2 13 / 15
11 A1 A1 Part H x2PCS Part I x2PCS I 2 A1 Hardware 2 x4PCS 2 H Accessory A1 x6PCS A1 2 A1 A1 H 2 I Front Top 1 2 12 Hardware 2 x4PCS E 2 I 2 2 F I 2 Front Top 14 / 15
13 Part N x1PC A2 Accessory A2 x4PCS N A2 L Top A2 Front A2 L 14 ASSEMBLY COMPLETED Please ensure the furniture rests on an even and flat surface. If the produst wobbles or feels loose,double-check all bolts and/or screws are properly tightened and secured. Keep this handy! Please retain this instruction manual and any order-related information for future reference.
