Assembly Instruction

1.0
Assembly Instructions (English)
ASSEMBLY INSTRUCTION FOR
Floor Lamp
Floor Lamp Floor Lamp
Floor Lamp
1. Screw tube (B)- 3 pieces into base (A) clockwise to
tighten.
2. Insert acrylic table (C) into tube (B), and tighten it with
tubes (D)- 3 pieces
3. Insert acrylic table (E) into tube (D), and tighten it with
tubes (F)- 3 pieces. You may need to push any excess cord
(G) gently to ensure these poles fit.
4. Insert the shades (I)- 3 pieces onto sockets (H)- 3 pieces,
and then turn the socket rings (J)- 3 pieces onto sockets
to secure shades.
GENERAL PRODUCT INFORMATION:
This product is suitable for dry locations only.
---------------------------------------------------------------
IMPORTANT SAFETY INSTRUCTIONS:
This portable lamp has a polarized plug as a feature to reduce
the risk of electric shock (one blade is larger than the other).
This plug will fit in a polarized outlet only one way. If the
plug does not fit fully in the outlet, reverse the plug. If it still
does not fit, contact a qualified electrician.Do not use with an
extension cord unless the plug can be fully inserted. DO
NOT ALTER THE PLUG .
-------------------------------------------------------
BULB TYPE: Use only with maximum of 3*60 watt
incandescent bulbs or 3*13W CFL bulbs. (bulbs not included)
Must use all incandescent or all CFL bulbs.
PARTS DIAGRAM
(3) * Socket rings (J)