Assembly Instructions

A
A
F
C
D
B
G
H
I
REMOVE ALL PARTS FROM PACKAGE, BE CAREFUL NOT TO DAMAGE ANY COMPONENTS.
E
Measure area and determine desired hanging height.
1.
Thread wire (E) from fixture thread [B] through stem [A].
3.
Product comes with one (1) 6” hard stem [A] for semi-flush
hanging height. Product may also be flush-mounted
without stem.
2.
Detach mounting plate [C] from canopy [D]. Thread wire
[E] through canopy.
4.
Flip over fixture so the three diffuser tabs are showing.
Place diffuser circle [G] on top of tabs so holes align.
Place decorative washer [H] over hole. Insert finishing
screw [I] and tighten by hand.
5.
Install bulbs 60W max (not included).
6.
Mounting plate [C] will attach to ceiling junction box.
7.
8.
Note: Turn off switch before replacing the bulb. Make sure the bulb has sufficient time to cool down.
Do not subject the lamp to any shock while lit as shattering of glass shade may result.
C
D
G
H
I
B
E
F
x2
DOUBLE DRUM CEILING LIGHT
Install light to ceiling. We recommend installation by a
qualified electrical professional. Canopy nuts [F] are used
to tighten light to ceiling. Remove plastic wrapping from
fabric shade before turning on light.