Assembly Instructions

I. Apply 4 pads (#E) on the pre-drilled holes on the
seat (#1). Align the seat frame (#2) to the pads on
the pre-drilled holes located under the seat (#1).
II. Prepare 4 bolt assemblies by inserting a flat washer
(#B) onto the bolt (#A). Insert into the seat frame
and secure using the Allen wrench (#C).
Apply the foot pads (#D) onto
the bottom of the seat frame.
Carefully turn the completed chair upright. Make sure the chair is rested on a flat surface and does
not feel loose or wobbly. If it does, double check that the bolts are secured and properly tightened.
ASSEMBLY IS COMPLETED