Installation & Assembly

1
Installation Instructions for
Secure the mounting plate to the junction box.
Connect the fixture to a suitable ground in accordance to local electrical codes.
Connect the white fixture wire to the neutral power line wire with a wire nut.
Connect the black fixture wire to the hot power line wire with a wire nut.
Align the keyed slots on the fixture base with the threaded studs, insert the studs into the fixture base, and secure in place
by rotating clockwise. Tighten the threaded studs.
Screw the lamps into the sockets. Refer to the label on the lamp socket for Max Wattage information.
Insert the shade into the fixture base and secure in place by rotating clockwise.
1
2
1A
3
4
1
1
6
7
5
1.0
CAUTION RISK OF FIRE-
This product must be installed in accordance with
the applicable installation code by a person familiar
with the construction and operation of the product
and the hazards involved.
Use minimum 90°c supply conductors.
GP I :ENERAL RODUCT NFORMATION
These fixtures are intended to be installed utilizing compliant junctionNEC
boxes.
This product is safety listed for damp locations.
Incandescent lamps may be dimmed with a standard incandescent dimmer.
LED LEDlamps may be dimmed with a dimmer. Consult lamp manufacturer for
additional information.
This instruction shows a typical installation.
LAMP
SHADE
MOUNTING PLATE
THREADED STUD
JUNCTION BOX
FIXTURE BASE
6
4
3
7
3
Flush Mount