Installation manual Dimensions Bulb Type : GU bulb, include bulb Lamp Frame Weight : 7.63 LBS Total Weight :10.1 LBS Thank you for choosing our exquisite products, We are providing the finest quality crystal chandelier for our customers. Our master designers and craftsmen intend to give a professional insight on our priority. We enclosed detailed instructions on how fo install your light fixture properly.
SAFETY Warning: MAKE SURE THE ELECTRICITY TO THE WIRES YOU ARE WORKING ON IS SHUT OFF.BY EITHER REMOVING THE FUSE OR TURNING OFF THE CIRCUIT BREAKER. CAUTION Before assembling the lighting fixture, please read all instructions carefully. All frame & crystal components are fragile, please handle with care. Required supply circuit : 110 130V/60Hz Labeled wires live neutral GND.
Warranty The finish and frame of your new chandelier or fixture are warranted for a period of two (2) years from the date of purchase. Our company will, at its option, repair or replace any frame that has a defect in the materials or workmanship during the warranty period. All crystals are guaranteed for their original quality during the life of the chandelier. Breakage is not covered by this warranty.
Part Picture Description Qty | Check list P21 == M10 Hex nut 4 P22 5 GUI Socket 4 P23 GUI Bulb 4 P24 g GUI Ocker cover 1 P25 = Cable tie 2 P26 0 Tu notion caps 2 P27 — Heat shrink tubing.
Cleaning and Maintenance of Chandelier Frame The finish on our chandelier frames and fixture frames is protected by a durable coating of lacquer. To clean, use a clean soft, dry cloth.Do not use any metal polishes, cleaners, abrasives or any substance which could remove the protective finish. Failure to follow these instructions automatically voids the guarantee. Cleaning and Maintenance of Crystals Wet a soft cotton fabric in clean warm water and wipe gently, then polish with a dry soft cotton fabric.
Step 3 Frame Assembly Instructions Installation: Please read all instructions carefully. Before you proceed to install,make sure that the power supply is turned off and remains off until installation is complete. Please note that each part has been assigned a number. Please proceed in a numerical order. 1.Use Knurled nut(02) to fasten Canopy(01) together with Mounting bracket of Ceiling panel. 2.Install G9 Bulb(03). The end! pof ¥ X Congratulations ! You are now done installing your Lighting fixture.
