Installation Instructions & Operating Manual

5
FITTING DECORATIVE STONES
●Ensure the appliance is unplugged.
●First remove the trim, the trim is held on by magnets, Put gently forward to remove, see Diagram 1.
●There is a clamp at the top of glass viewing panel that secure the glass in place, see Diagram 2.
●Supporting the glass, loosen and remove the 2 clamps. These can be unscrewed using just finger tips.
●Carefully tip the glass forward and lift out of the lower tray to remove from the appliance. See Diagram 3
The clamp can be used to aid removal.
●Evenly spread the decorative stones across the fuel bed.
●Replace the glass following the instruction in reverse order.
●Replace the clamps, see Diagram 4.
●Replace the trim following the instruction in reverse order.