Installation Instructions & Operating Manual

7
Flame button
The fire has four flame effects and a standby, by pressing the flame effect button the unit will cycle
through each condition.
Heater button
Press once turns 650W power on. (Pilot lights illuminated ●○)
Press again turns 1300W power on (Pilot lights illuminated ●●)
Press third time turns heater off. (Pilot lights illuminated ○○)
To Reset the Heater
Your heater includes a protection system that shuts off the heater if it overheats for any reason:
1) Turn unit to off.
2) Wait 5 minutes.
3) Turn on.
● Remote control functions
In order to protect the product from becoming too hot, there is an 8s delay when turning on the heater;
also there is an 8s delay when turning off the heater fan.
Make sure the batteries are installed properly in the remote control.
The effective range of the remote control is up to 4 meters or 13 feet.