USER GUIDE MEDICINE CABINET - SINGLE DOOR WITH LED LIGHTED MIRROR
IMPORTANT SAFETY INFORMATION Please read through this installation instruction so you will know how to install and operate your model properly. Keep this document in a safe place for future reference after use. WARNING This product must be installed in accordance with the installation instruction by qualified technician. Failure to follow instruction could result in death or serious bodily injury. CAUTION This product must be serviced by qualified personnel.
INSTALLATION For drywall installation, mark the hole locations and drill Φ 6mm holes for the drywall anchors. Insert provided drywall anchors. Connect to 110V power supply. Hang the mirror to the wall and make sure the bracket in the back of the mirror lineup with the mounting bracket properly. Install the mounting bracket. Press the mirror down slightly and make sure the brackets fit properly. • Using the wall studs to hang the mirror is highly recommended.
INSTALLATION DIMENSIONS A C B 4 A B C 20 26 5 1/4 24 26 5 1/4
BASIC OPERATION 1. Rocker switch a. Locate the rocker switch on the side of the cabinet. b. Turn the lights on or off by pressing the switch.
CARE AND MAINTENANCE Clean the mirror with a soft, damp cloth and dry thoroughly with a soft towel. Do NOT allow the edges of the mirror to get or remain wet over a period of time. Please do NOT use glass cleaner that contains ammonia or vinegar. Never spray any cleaner directly onto a mirror. Instead apply the cleaner to a soft cloth and then wipe the mirror. Make sure no commercial cleaner comes in contact with the edge or backing.
REPLACEMENT PARTS Part Description 1 Mirror Door 2 LED Light 3 Plastic Cover 4 Hinge 5 Connection Box 6 LED Driver 7 Electrical Cover 8 Back Board 9 Aluminum Side Panel 10 Glass Shelf 11 Rocker Switch All rights reserved.
