Owner`s manual

10
Connecting to a Preamplifier
Connecting to a Preamplifier
There are two different ways the 321 may be operated
in an audio system. The first way is as a Digital to
Analog Converter with Input Switching. The Audio
Output of the 321 is connected to an Analog Input on
the Preamplifier (Integrated Amplifier or Receiver).
Follow the instructions and diagram on this page.
The second way is as the Main Audio Preamplifier
connected directly to a Power Amplifier, follow in-
structions on the next page.
On this page is an example of a typical audio
system. Your system may vary from this, however the
actual components would be connected in a similar
manner. For additional information refer to “Connec-
tor and Cable Information” on page 5.
Note: 1. The Output Connection Balanced or Unbal-
anced may be used simultaneously.
Analog Audio Connections:
1. Connect audio cables from the 321 UNBALanced
AUDIO OUTPUTS R & L (Right and Left) con-
nectors to the unbalanced Aux Input Connectors
on the Preamplifier (A/V Control Center, Integrat-
ed Amplifier or Receiver).
Note: 1. The Balanced Outputs may be used instead of
the Unbalanced Outputs.
Digital Audio Connections:
2. Connect a Digital Optical Cable from the 321
DIGITAL AUDIO INPUTS OPTICAL 1 connector
to the CD Player Digital Optical Output connector.
3. Connect a Digital Coaxial Cable from the 321
DIGITAL AUDIO INPUTS COAXIAL 1 connec-
tor to the Server Digital Coaxial Output connector.
4. Connect a USB cable with (type A to type B) con-
nectors from the 321 DIGITAL AUDIO INPUT
USB connector to the Computer USB connector.
AC Power Cords Connections:
5. Connect the 321 AC Power Cord to a live AC
outlet.
AUDIO OUTPUT
CD PLAYER
SERVER
Connect to
AC Outlet
Computer