Owner`s manual

17
Windows Sound Settings
For proper operation of the McIntosh Product via the
Computer USB Connection, it is required to make
changes to Windows Sound Settings:
1. Click on the “WADIA ICON” (located in the
Windows notification area on the right side of
the taskbar) or click on the Wiondows “Show
hidden icons”, then select the “WADIA ICON”.
Refer to figures 11, 12 and 13.
Note: Some version(s) of Windows might not show
the Wadia Icon. Click on the “Start” but-
ton, select “Control Panel”, then “Sound”.
Proceed to step 3.
How to Operate the 321, con’t
2. Right mouse button click to bring up the menu
and then select the “Sound and Audio....”. Refer
to figures 14 and 15.
3. Select the “Speakers Wadia USB Audio”
and then click on the SET DEFAULT button.
Refer to figures 16 and 17.
Notes: 1. When the Wadia USB Audio Product is not
connected to your computer, the previous
default Audio Device will be selected.
2. If other Wadia Products with USB Audio
Connections are also connected to the
computer, an additional “Wadia USB
Audio” playback device will appear in the
listing. Make sure to select the “Wadia
USB Audio Device” from available play-
back devices listed when using this Wadia
Product for USB Audio.
Fig u re 11
Figure 12
Figure 13
Figure 14
Figure 15
Figure 17
Figure 16